Search the Community
Showing results for tags 'vr'.
4 downloadsHi all, After too much time learning about fixing aircraft for VR (thanks simvrlabs) I updated the King Air C90B so that you can use the controller to move both prop and mixture levers together. If you use controllers to control the throttle quadrant, I am sure you have noticed that in many planes they don't move together. You can just move left and right individually. I think I have fixed it so you can move both and left or right. If any of you all want to give it a test I would appreciate it. **When I export from ACDC I think I have double entries in the file and other weird things going on. I am new so I will keep playing around. If anyone has some input into how I can improve the file I would really appreciate it. So far it all works though. (I think)** Install (I know everyone knows how to do this but....make a backup!) Step 1 Make a new folder in the x-plane aircraft folder called "modded" eg. Step 2 Copy/paste the original King Air Aircraft into the new modded sub-directory Copy \X-Plane 11\Aircraft\Laminar Research\KingAir C90B\ Paste \X-Plane 11\Aircraft\MODDED\KingAir C90\ Step 3 Download the attached file Unzip and overwrite to \X-Plane 11\Aircraft\MODDED\KingAir C90\ To choose the modded King Air in the X-plane Flight Config, you can see which is the modded version by hitting the "Customize" and checking the "File Path". Have a test and let me know. Just a note. I contacted Carenado about sharing the .OBJ and they said it was fine. Happy flying, BadivanBad Find me on Twitch Mixer or Youtube, just search BadivanBad
I am trying people hear this alot I am working on fixing the Throttle Prop and Mixture on the Carenado PA31 they don't move together properly in VR. The Datarefs for Corenado are different. I have watched the videos on youtube and they are super helpful (thanks Joe_k). There are still issues while I work with it. Remember I am a noob at all this but I am not afraid of notepad++ or AC3D. Would anyone be willing to chat on Discord or I can livestream the issues I am dealing with? If anyone is good at this stuff and doesn't mind lending me a hand I would greatly appreciate it. I am happy to share any fixes as I make em. I am new to the forum, an you all will probably see me around. I am hooked on VR and would like these planes to work right. Thanks, BadivanBad
This mod was created by Father-Son Flight Simulator, a member of the SimVRlabs club. The file is provided free of charge and will be maintained here on Threshold SimVRlabs club from the point of this posting as hobby time permits! This file is a VR Conversion of the Lancair Legacy by Harranssor, which has been made available to the community for free at X-plane.org. You must first install this plane and then apply the conversion. Note: these changes will also fix several issues found in the 2D version! This VR conversion may be desired even if you do not utilize VR. Items Changed in this VR Conversion: - Virtually ALL buttons and knobs on the GPS, radios, and autopilot had to be rebuilt for VR - Cockpit display and light intensity knobs changed to rotation motion for VR mode and drag axis for 2D mode - Fuel and fuel adjustment switches work on the right panel in VR using rotation dial in VR mode and drag axis for 2D mode. - Fixed the Garmin SL30 knob (right side knob) to perform nav/com/obs dialing based on: Com mode, Nav mode, Navcom 1-2 select, and OBS select. Note - the inner dial was not originally modeled, so I added one. IMPORTANT: the Garmin SL30 is inseparably tied to the glass cockpit display, Hence the CDI must also be selected in the menu for the Nav you want to adjust the OBS for, otherwise the SL30's OBS dial will be locked! - Fixed the Garmin SL30 flip flop button to work in VR for all navcom mode selects based on Com or Nav mode, and Navcom 1 or 2 select. In navcom 1 mode, it will flip the com and nav standby on the GPS GS-530 in tandem. - repaired the inner and outer knobs and push functions on the GPS GS-530, these knobs now work with rotation motion in VR using the VR controller. - Autopilot knob now adjusts the heading bug instead of barometric pressure. Note: Adjust barometric pressure using the menu option buttons. - Added push to sync function on the autopilot heading knob - ALL knobs tuned for rotation dial speed for the VR controller for VR mode. - Key activates and also is tuned for VR controller rotation for mag 1, 2, both and start. - Fuel tank select changed to a rotation motion in VR and tuned. - Joysticks are now manipulated with either the mouse in 2D or with VR controller in VR mode. Copilot uses simple joystick mode, but the pilot joystick is tuned to the VR controller motion. If you are flying using VR controllers only, recommend realistic and latch mode on. - The canopy open and close lever toggle in between the seats is fixed, it's now visible and works in VR. - Created teleport locations for pilot and copilot seats. (tuned for an average height individual) Please note: In this plane you sit pretty far back as the seats are somewhat reclined. Installation: 1. Must have the Lancair Legacy installed into your aircraft folder (See link below; Just download and unzip it into your "....\X-Plane 11\Aircraft\Extra Aircraft" folder.) 2. It is recommended to back up the original Legacy_cockpit.obj file (rename it to Legacy_cockpit-original.obj) 3. unzip the VR conversion file into the aircraft folder directory and allow replacements if requested. Special thanks to Harranssor for providing this plane to the community and acknowledging my request to make this modification for VR. A very special thanks to Joe K. @ SimVRlabs for helping me overcome the technical hurdles faced during the modification project. You can find a Demo Video explaining and highlighting these features at: Harranssor's Lancair Legacy is often featured in the downloads section. Find it at: https://forums.x-plane.org/index.php?/files/file/41357-lancair-legacy-fg/&do=download&csrfKey=e331fb60e43a20b464eeed5e20257e1d Disclaimer: This mod is not officially supported by the original aircraft designer. Please do not ask him for technical support related this modification. Lancair Legacy VR.zip
This mod was created by Father-Son Flight Simulator, a member of the SimVRlabs club. The file is provided free of charge and will be maintained here on Threshold SimVRlabs club from the point of this posting as hobby time permits! This is my first project to give back to the community AND my first attempt at doing a VR improvement from an originally non-VR supported plane. If you load the original plane in VR mode, it works but the buttons and switches are really hard to manipulate and don't feel natural. If you enjoyed flying this plane before, in VR it will blow you away! Perfect for practicing aerial acrobatics. The file updates the work by X-Plane.org and Nils: http://nd-art-and-technology.com/ by modifying the cockpit OBJ file and adding a vrconfig file. It makes the manipulators that are already available more easy to manipulate in VR mode and adds a cockpit hotspot so you can get in and out of the plane using the teleport function. The Mod makes the following changes: - Joystick and Throttle controls are now operable with VR controllers and tuned to match VR motion controllers. The Joystick is also mouse clickable in 2D mode. - Cowl flap travel path adjusted and tuned to match VR motion controllers - Primer switch path adjusted and tuned to match VR motion controllers - Several click points have been resized and centered on the panel for the various knobs. - All knobs (radio knobs, OBS, barometric pressure, mag position, etc) have been adjusted to use a rotation motion with VR controllers and tuned for rotational speed. - Pilot teleport spot created and tuned for a person of average height. Must have the original YAK-55M for X-plane 11 installed, get it at: https://forums.x-plane.org/index.php?/files/file/40784-yakovlev-yak-55-by-nda/&do=download&csrfKey=e331fb60e43a20b464eeed5e20257e1d INSTALLATION: 1. Install the original plane by unzipping it into your .../X-plane 11/Aircraft/Extra Aircraft folder. 2. It is highly recommended you backup the original file first: YAK-55M_cockpit.obj (Rename to YAK-55M_cockpit-original.obj) 3. Simply extract these files into the YAK-55M top folder, wherever you placed it in your aircraft folder; allow replacement of file: YAK-55M_cockpit.obj Find my Youtube Channel and video demo at: Disclaimer: This mod is not officially supported by the original aircraft designer. Please do not ask him for technical support related this modification. YAK-55M_VR Conversion.zip
48 downloadsThis plugin will display vital information like Heading, Airspeed, Altitude, and Vertical Speed. Great plugin for those new to Flight Sim and want to display vital information at finger tip. Here is my video preview. This plugin requires latest version of FlyWithLua 2.7.9. Simply copy the script "Accurate Vital Display.lua" it to the your X-Plane 11\Resources\plugins\FlyWithLua\Scripts folder. This script is open source and is maintained through GitHub https://github.com/Simssmith/xplane-accurate-vital-display Future version will include more customization and a key binding to make this windows visible/hide. Feedback appreciated. Special thanks to developer sparker for code contribution. Older version of this plugin can be download from https://github.com/Simssmith/xplane-accurate-vital-display/releases