Jump to content
Sign in to follow this  
Marten@Stairport

[Part 5] Draw Jetway Bridges

Recommended Posts

Since SAM 1.1.0 bridges are available to connect the terminal building with a jetway. The following types are availabe:

Type 1 - Glas | Type 1 - Solid | Type 2 - Solid

You can access them through the World Editor in SAM_Library -> bridges. Here is how to place them:

  1. Select the bridge type.
  2. Draw the bridge to your liking. It has to end on the vertex of the jetway (rotunda centerpoint). Please note that only one segment is available, multiple segments are not possible (yet).
  3. Select one node of your drawn facade and select the bridge height in the object options to match your jetway.

wed.png.1abf5bf7e4d78de1a2cd65ff2ac7280c.png

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Current Donation Goals

  • Threshold News

  • Threshold articles

  • Threshold clubs

  • Top Downloads

    1. By audiobirdxp
         690   78
    2. By Captain Kitten
         610   12
    3. By Xephyr
         76   5
    1. By audiobirdxp
         3,142   78
    2. By Captain Kitten
         2,757   12
    3. By Xephyr
         279   5
    1. By audiobirdxp
         40,268   78
    2. By Captain Kitten
         19,161   12
    1. By audiobirdxp
         40,268   78
    2. By Captain Kitten
         20,860   12
×
×
  • Create New...

Important Information

Please read the Terms of Use