Argaeus Posted May 27, 2020 Share Posted May 27, 2020 I filed a bug report at your website (stariport) but I think there is a problem logging back to it so wanted to share my problem here as well. The problem is with the FMT(5.0) DGS and before deciding on which type to use in my project, I placed one of each to my scenery using WED and tried to start up the sim to no avail - CTD al the time (I tried at least 5 times). Then I removed all but 1 to test each and only CTD happened with FMT, all other 4 DGS showed up perfectly fine. Tests were run with previous SAM plugin 2.0.6 and also the same happened with the current v2.0.7. I cannot attach the files as they are long gone now but you can probably get them from your website attached to my bug report. Link to comment Share on other sites More sharing options...
Marten@Stairport Posted May 27, 2020 Share Posted May 27, 2020 Confirmed and fixed for 2.0.8. When do you plan to release your scenery? Meanwhile you can replace the objects in Custom Scenery/SAM_DeveloperPack/dockings Resources/plugins/SAM/lib/SAM_Library with the ones attached. FMT-AVDGS-3.5m.agpFMT-AVDGS-4.0m.agpFMT-AVDGS-5.0m.agpFMT-AVDGS-4.5m.agpFMT-AVDGS-2.5m.agpFMT-AVDGS-3.0m.agp Link to comment Share on other sites More sharing options...
Argaeus Posted May 27, 2020 Author Share Posted May 27, 2020 (edited) 6 hours ago, Marten@Stairport said: Confirmed and fixed for 2.0.8. When do you plan to release your scenery? Meanwhile you can replace the objects in Custom Scenery/SAM_DeveloperPack/dockings Resources/plugins/SAM/lib/SAM_Library with the ones attached. FMT-AVDGS-3.5m.agp 373 B · 0 downloads FMT-AVDGS-4.0m.agp 371 B · 0 downloads FMT-AVDGS-5.0m.agp 371 B · 0 downloads FMT-AVDGS-4.5m.agp 371 B · 0 downloads FMT-AVDGS-2.5m.agp 375 B · 0 downloads FMT-AVDGS-3.0m.agp 373 B · 0 downloads Thanks Marten, I still have too many to add so I will use the new ones for them. I have already added more than 150 of the Honeywell ones around the terminal so I'll just leave them for now. This project (LTFM) is the one that I already uploaded to the Gateway and now decided to add SAM jetways (finished as of now) and Marshallers/DGS panels to it. Edited May 27, 2020 by Argaeus Link to comment Share on other sites More sharing options...
Argaeus Posted May 27, 2020 Author Share Posted May 27, 2020 All is fine now, thanks. Link to comment Share on other sites More sharing options...
Argaeus Posted June 17, 2020 Author Share Posted June 17, 2020 (I see that you are more active here than your mailbox, I am just posting my message here) Hi Marten, Are you planning to update SAM to 2.0.8 soon or is it going to take some more time?As I used subject "revised" items that you shared with me recently in my scenery it does not open up in other users' systems and in most cases causes CTD.Is it ok if I share these items in proper folder structure so that people can copy the files to their Plugins folder? Unfortunately I had to hide the scenery for the time being.Regards. Link to comment Share on other sites More sharing options...
Marten@Stairport Posted June 17, 2020 Share Posted June 17, 2020 1-2 weeks I guess. Yes feel free to share it. Link to comment Share on other sites More sharing options...
Argaeus Posted June 17, 2020 Author Share Posted June 17, 2020 Thanks. Link to comment Share on other sites More sharing options...
N1K380 Posted September 8, 2020 Share Posted September 8, 2020 Him this seems to have resurfaced in v2.1.0 Kept crashing until i replaced with the files linked above. Link to comment Share on other sites More sharing options...
Marten@Stairport Posted September 9, 2020 Share Posted September 9, 2020 Are you sure that you use 2.1.0? I just compared the files attached above with the 2.1.0 repo and they are exactly the same. Link to comment Share on other sites More sharing options...
N1K380 Posted September 10, 2020 Share Posted September 10, 2020 Its changed slightly since i posted that, sam suite is showing 2.1.0 (with developer 1.0.1 which I installed after i initially posted), I only replaced the 3m file from this post as that's what im using. In Wed just selecting, as the active object WED crashes to desktop. The other day, i had tried placing a safegate, then edit the resource to point to FMT which crashed the sim too, but now its loading in the sim doing that, I must have miss typed the asset name or something. I replaced the above 3m file in the Custom Scenery\SAM_Library\dockings folder and it started working. Right now doing it as i type this with the 5m, its just wed that is crashing repeating those steps, until I replaced with the above file into the SAM_DeveloperPack folder. Link to comment Share on other sites More sharing options...
Marten@Stairport Posted September 10, 2020 Share Posted September 10, 2020 Okay we might have forgot to replace it in the DeveloperPack as well, I'll check. Link to comment Share on other sites More sharing options...
Marten@Stairport Posted September 10, 2020 Share Posted September 10, 2020 Just forgot to release the updated version Download DeveloperPack 1.0.2 through SAM Suite and you should be good. Link to comment Share on other sites More sharing options...
Recommended Posts