X-Scenery Mitsubishi MU-2B Marquise

[Joe_K]

Out of the VR Lab: Mitsubishi MU-2B Marquise

Nearly everything that is moveable in this aircraft has been customized and tuned with VR controllers in mind.  Yoke, Trims, Throttle, Condition Levers, Switches, Knobs, and Hotspots at every seat.

Highlights of things tweaked to work in VR are:

-Condition Levers tuned with haptic detents at every stop-pit
-Throttle with detents you can feel at the transition from flight idle
-Flaps with every detent added to the haptic vibrational feedback
-All knobs tuned
-All switches tuned with respect to functionality, i.e. holding the switch down and on release, it springs back to centre.
-Speed Brake with haptic detents
-Reverse throttle perfectly tuned
-Center throttle and condition manipulators added to control both levers at once
-Elevator trim tuned for accurate speed
-HDG dial
-CRS dial
-Altimeter baro pressure knobs
-Altitude Selector knob
-VR Yoke added and tuned
-Custom teleport hotspots, including one at the cabin door and in a wing window passenger seat.

Things that still don't work correctly:

*The yoke has some hydraulic smoothing coded into the roll.  It's not noticeable if you are flying her easy and correctly, but it can only be rolled so fast.  It's not a bug, but it's a noticeable thing and is a bit different than the other SimVRlabs aircraft.  You definitely feel just a tad disconnected from fast and small corrections with regard to roll - pitch feels perfect.

 

Installation Instructions:

Please read the disclaimer at the bottom of the page.  This update in no way effects flight model or systems, only manipulator interaction with regards to VR, and some VR teleport hotspots added.

I recommend making a backup copy of your X-plane 11/Aircraft/Mitsubishi folder.  Just rename it to something like Mitsubishi Old, so you can easily just revert back if you need to.

Step 1. Unzip the file and you'll find 2 files.   Add both the xsMU2B60_vrconfig.txt file and the xsMU2B60_cockpit.obj to your Aircraft's root folder, overwrite.

Step 2.  Enjoy!

Disclaimer: This is not an officially supported X-Scenery update, so don't expect support from them on it. If you need help you can always ask me through the support section of the website or just revert to your backed up folders. If you lose the old files and just want to reset everything just reinstall the aircraft.

 

------------------------------------------------------------------------

You must be a member of the club to download any files so please go ahead and join up, otherwise you will get an error.

SimVRlabs-Mitsubishi-MU-2B-60-V100.zip

Edited December 8, 2018 by Joe_K