Joe_K Posted November 26, 2018 Share Posted November 26, 2018 (edited) Out of the VR Lab: Carenado B1900D HD Now featuring a fully working Autopilot for VR touch controllers, working yoke, and many other custom hand-tuned manipulators optimized to work with VR touch controllers. No more axis lines on the throttle and condition levers and those armrests. I worked very hard to make things just act and "feel" as right as they can. Manipulators that have been tweaked to work in VR are: -All Autopilot buttons working -Throttle with detents you can feel at the transition to reverse throttle -Props and mixture customized and tuned -Perfectly tuned IAS bugs around the airspeed indicator -All overhead light knobs tuned -ADF and Transponder knobs tuned -Arm Rests -Oxygen and AC levers tuned -Pressurization Knobs -CRS 1 OBS dial -HDG dial -CRS 2 OBS dial -Flaps no longer an animated toggle, now a fully working lever with detents you can feel -Altimeter baro pressure knobs -Altitude Selector knob -Parking Brake hand tuned -Avidyne Page knob -Avidyne zoom knob -Custom interior volume knob rotation corrected and tuned -VR Yoke added and tuned -Custom teleport hotspots, including one at the cabin door and in passenger seats Things that still don't work correctly: *The Climb and Descend buttons on the autopilot require you to push the V/S autopilot button first for them to work correctly. Carenado has these as custom manipulators that do both of these actions on one mouse click, but I couldn't create a custom VR-clickable manipulator that replicates this by firing two datarefs at once...so you just have to hit V/S and then hit Climb or Descend, and then it works fine - Starts you on a +800 fpm or -800 fpm climb and descent, respectively. *The visors are a mess. *The props do not have a centre click-spot to move them all at once, so you'll have to move them one at a time with the VR controllers. This is due to some custom code conflicts that can not be corrected with this version. *The Master Caution Reset and Master Warning Reset buttons do not work with VR controllers, only on mouse-click. Again due to some custom coding that can only work on mouse click, not VR controllers. It works well with VR mouse though. What's New in V101: Heading Sync bug has been fixed, altitude knob has been tuned for faster speed. Installation Instructions: I recommend making a backup copy of your X-plane 11/Aircraft/Carenado B1900D folder. Just rename it to something like Carenado B1900D Old, so you can easily just revert back if you need to. Step 1. Unzip the file and you'll find 2 files. Add both the Car_B1900D_vrconfig.txt file and the Car_B1900D_cockpit.obj to your Aircraft's root folder, overwrite. Step 2. Enjoy! Disclaimer: This is not an officially supported Carenado update, so don't expect support from them on it. If you need help you can always ask me through the support section of the website or just revert to your backed up folders. If you lose the old files and just want to reset everything just reinstall the aircraft. ------------------------------------------------------------------------ You must be a member of the club to download any files so please go ahead and join up, otherwise you will get an error. SimVRlabs-B1900D-V101.zip Edited December 8, 2018 by Joe_K 3 Link to comment Share on other sites More sharing options...
Recommended Posts