Joe_K Posted December 21, 2018 Share Posted December 21, 2018 This update tweaks nearly everything to work better in VR. I worked very hard to make things just act and "feel" as right as they can. Manipulators that have been tweaked to work in VR are: -All knobs -Throttle -Prop levers -Haptic feedback detents -All other levers -Elevator Trim wheel -Mixture -Overhead Trims now work -Lighting and Temperature knobs -CRS 1 OBS dial -HDG dial -Altimeter baro pressure knob -Instrument brightness knobs -VR Yoke added and tuned for realistic mode -Hotspots in all seats Installation Instructions: I recommend making a backup copy of your X-plane 11/Aircraft/SMS Beaver folder. Just rename it to something like SMS Beaver Old, so you can easily just revert back if you need to. Step 1. Unzip the file and you'll find 6 files. Add them to your Aircraft's root folder, overwrite. Step 2. Enjoy! Disclaimer: This is not an officially supported update by the developer, so don't expect support from him on it. If you need help you can always ask me or just revert to your backed up folders. If you lose the old files and just want to reset everything just reinstall the aircraft. ------------------------------------------------------------------------ You must be a member of the club to download any files so please go ahead and join up, otherwise you will get an error. SMS DHC2 Beaver SimVRlabs V100.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts