Tupps Posted January 26, 2019 Share Posted January 26, 2019 Gents, Wonderful product and much appreciated. Simple question (Can't seem to find an answer in this Forum) Landed at Aerosoft Zurich LSZH...... taxied in, parked.... How do I trigger the gate please? Tried position lights off, beacons off, strobes off, engines off.... Advice please.... cheers chris from oz Link to comment Share on other sites More sharing options...
Marten@Stairport Posted January 26, 2019 Share Posted January 26, 2019 Hi Chris. It's beacon and engines off. At LSZH not all parking positions work because some are out of range due to a limited Jetway object. I hope to have a new Jetway model in the future but the original developer PADLabs is quite busy with other projects so that's a limit for now. Link to comment Share on other sites More sharing options...
seelenkrieger Posted January 29, 2019 Share Posted January 29, 2019 and if you use the FF A320 you must trigger the gate manualy, or do you have solved the Problem Marten? Link to comment Share on other sites More sharing options...
HaW Posted February 24, 2019 Share Posted February 24, 2019 Are there any SAM internal datarefs/commands that could be used with FWL to trigger manual connect/disconnect? Link to comment Share on other sites More sharing options...
Marten@Stairport Posted February 24, 2019 Share Posted February 24, 2019 Not yet. What do you try to achieve? Link to comment Share on other sites More sharing options...
HaW Posted February 27, 2019 Share Posted February 27, 2019 Well, if there were a dataref/command for manually connecting jetways, one could assign a key stroke or joystick button to it and wouldn't have to click through menus so much. What would be needed is a dataref/command to switch between manual and automatic mode, and one to manually connect/disconnect. Link to comment Share on other sites More sharing options...
Recommended Posts