snagar.dev

Great. I might give some love to the hp150 too. Didn't thought many use it.

Will do, but you should get it from skunckcruft update (make sure to register as beta) [edit] Here is a link to my "Better VR" page. These are only the cockpit files, you have to own the plane.

Thanks @Joe_K Took some time and lots of trial and errors to figure out the way it should move, although I did not use the manipulator you used, I might give this a shot. Here is what I defined and seem to work quite good: ANIM_begin ANIM_trans -0.320840 0.064190 2.100640 -0.320840 0.064190 2.100640 0.000000 0.000000 none ANIM_rotate 1.000000 0.000000 0.000000 118.000076 63.000149 0.000000 1.000000 sim/cockpit2/engine/actuators/throttle_ratio[0] ANIM_trans 0.320840 -0.064190 -2.100640 0.320840 -0.064190 -2.100640 0.000000 0.000000 none ATTR_manip_drag_axis hand 0.000000 -0.100000 0.000000 0.000000 1.000000 sim/cockpit2/engine/actuators/throttle_ratio[0] Throttle TRIS 67491 2160 ANIM_end

Hi. First I would like to say thank you for your tutorials in YouTube regarding "HOW TO" adjust your planes to VR. One of the planes I hoped to fly in VR was ASDG Super Cub. Unfortunately they never brought the "stick" to the VR realm and I left it on the shelf for few years. But, after watching your videos (I only saw 2 so far), I was able to: Bring the "stick/yoke" into the plane and make a nice "greenish highlight". Fix the Mixture in VR Fix the Prop in VR. w.i.p Throttle - convert from: "ATTR_manip_drag_axis" to "ATTR_manip_drag_rotate" fails. It always amazed me how companies like LR think that plane developers should figure it out all from their notes. A simple 2-4 visual tutorials would have brought the level of VR adoption and their quality to a much better levels. But I digress. Problem I would like to have the throttle move in a more natural way in VR (and in 2D mode too). Currently the manipulator was defined as "ATTR_manip_drag_axis" , but I think it should be "ATTR_manip_drag_rotate". The problem I'm facing, is to make the throttle lever move similar as the "mixture" (in/out") but on a "rail" and it also has an angle. Here is a snippet from the cockpit file: ANIM_begin ANIM_trans -0.320840 0.064190 2.100640 -0.320840 0.064190 2.100640 0.000000 0.000000 none ANIM_rotate 1.000000 0.000000 0.000000 118.000076 63.000149 0.000000 1.000000 sim/cockpit2/engine/actuators/throttle_ratio[0] ANIM_trans 0.320840 -0.064190 -2.100640 0.320840 -0.064190 -2.100640 0.000000 0.000000 none #ATTR_manip_drag_axis hand 0.000000 0.000000 0.100000 0.000000 1.000000 sim/cockpit2/engine/actuators/throttle_ratio[0] Throttle # ATTR_manip_drag_rotate <cursor> <x> <y> <z> <dx> <dy> <dz> <angle1> <angle2> <lift> <v1min> <v1max> <v2min> <v2max> <dataref1> <dataref2> <tooltip> # ATTR_manip_drag_rotate hand -0.320840 0.064190 2.100640 1.000000 0.000000 0.000000 118.000076 63.000149 0.000000 0 1 0 0 sim/cockpit2/engine/actuators/throttle_ratio[0] none ATTR_manip_drag_rotate hand -0.320840 0.064190 2.100640 0.000000 0.000000 0.500000 -10 10 0 0 1 0 0 sim/cockpit2/engine/actuators/throttle_ratio[0] none TRIS 67659 2160 ANIM_end (Sorry for the colors, this is what I was given by the editor). As you can see I have tried few options, and still am, but I could not understand the rules that make the movement forward/backwards, using the "angle1/angle2 + v1min/v1max" In the case of the Super Cub, the throttle is located on the left door, and you need to push it "forward" to accelerate and "backwards" to decelerate. So far I had mix experiences with the settings I did. Outcome was: The forward movement and backwards movements were not consistent and did not feel natural enough. When I brought the throttle to "full forward" it was harder to move it backwards since it seem its axes have been shifted, and now I needed to move my controller down/up or left/right (meaning, not to the natural direction I hoped). I'll appreciate if you could shed some light on this manipulator and how to make different movements/directions using it. Thanks Saar

Nice effort, Unfortunately after downloading latest version of this aircraft from x-plane store (v1.31), it has some incompatibility with the gauges, they are skewed outside of the plane.