Posting entire log (as well as the log from SAM, which I run in higher verbose level debug mode)
Additional Info:
These are the last log lines when the crash takes place:
5:04:36.835 D/STM: Transitioning from state state_Normal to state_ShuttingDown
FlyWithLua Info: Load exit file.
FlyWithLua Info: Exit file loaded.
FlyWithLua Info: FlyWithLua plugin disabled.
OCUSBMapper: XPluginDisable
OCUSBMapper: unregistering flightloop callbacks
OCUSBMapper: flightloop callbacks unregistered
OCUSBMapper: closing socket
OCUSBMapper: socket closed
OCUSBMapper: disabled
VR Tools : Plugin Disabled, internal driver still in memory
5:04:36.835 I/PLG: The plugin xPilot 2.0.0-beta.22 is setting global TCAS override to 0.
The plugin xPilot 2.0.0-beta.22 is releasing control of AI aircraft.
5:04:36.835 I/PLG: The plugin xPilot 2.0.0-beta.22 is setting global TCAS override to 0.
5:04:36.836 xPilot: xPilot plugin disabled
DataRefTool: Prefs saved to "F:\XPlane11/Output/preferences\datareftool.json"
OCUSBMapper: XPluginStop
--=={This application has crashed because of the plugin: [XPLM_PLUGIN_XPLANE]}==--
(Art controls are modified.)
AND here are the last lines for "good" exit with an older version of plugin:
0:19:50.918 D/STM: Transitioning from state state_Normal to state_ShuttingDown
FlyWithLua Info: Load exit file.
FlyWithLua Info: Exit file loaded.
FlyWithLua Info: FlyWithLua plugin disabled.
OCUSBMapper: XPluginDisable
OCUSBMapper: unregistering flightloop callbacks
OCUSBMapper: flightloop callbacks unregistered
OCUSBMapper: closing socket
OCUSBMapper: socket closed
OCUSBMapper: disabled
VR Tools : Plugin Disabled, internal driver still in memory
0:19:50.918 I/PLG: The plugin xPilot 2.0.0-beta.22 is setting global TCAS override to 0.
The plugin xPilot 2.0.0-beta.22 is releasing control of AI aircraft.
0:19:50.918 I/PLG: The plugin xPilot 2.0.0-beta.22 is setting global TCAS override to 0.
0:19:50.918 xPilot: xPilot plugin disabled
DataRefTool: Prefs saved to "F:\XPlane11/Output/preferences\datareftool.json"
OCUSBMapper: XPluginStop
[AOS] [2022-02-15.18:35:52] Configuration Saved
TGXP: Packet send size HWM 0
VR Tools : Plugin Halted, deleted internal driver
Xsaitekpanels: XPluginStop has been called
ZHSI: Stopping plugin
ZHSI: FlightLoop Callback Unregistered
ZHSI: Clients disconnected
ZHSI: Plugin stopped!
2022-02-15 18:35:52 librain VR compatible (RYUJIN 082019)[plugin.c:829]: librain unloaded
Zibomod plugin unloaded.
Clean exit from threads.
0:19:50.918 I/JOY: Control response for axis joy_use_ptch: 0.495570
0:19:50.918 I/JOY: Control response for axis joy_use_roll: 0.495570
0:19:50.918 I/JOY: Control response for axis joy_use_hdng: 0.500000
0:19:50.918 I/JOY: Control response for axis joy_use_lbrk: 0.000000
0:19:50.918 I/JOY: Control response for axis joy_use_rbrk: 0.000000
0:19:50.918 I/JOY: Control response for axis joy_use_tiller: 0.000000
0:19:50.918 I/JOY: Stability augmentation for axis joy_use_ptch: 0.749557
0:19:50.918 I/JOY: Stability augmentation for axis joy_use_roll: 0.749557
0:19:50.918 I/JOY: Stability augmentation for axis joy_use_hdng: 0.500000
0:19:50.918 I/JOY: Stability augmentation for axis joy_use_lbrk: 0.000000
0:19:50.918 I/JOY: Stability augmentation for axis joy_use_rbrk: 0.000000
0:19:50.918 I/JOY: Stability augmentation for axis joy_use_tiller: 0.000000
0:19:50.918 I/JOY: UNREGISTER Joystick device: BU0836X Interface - VID:7634PID:4097
0:19:50.918 I/JOY: UNREGISTER Joystick device: Model 2040 - VID:24599PID:13602
0:19:50.918 I/JOY: UNREGISTER Joystick device: Saitek Pro Flight Rudder Pedals - VID:1699PID:1891
0:19:50.918 I/JOY: UNREGISTER Joystick device: GoFlight YOKE - VID:2547PID:41
0:19:50.918 I/JOY: UNREGISTER Joystick device: Saitek Pro Flight Rudder Pedals - VID:1699PID:1891
0:19:50.918 I/JOY: UNREGISTER Joystick device: GoFlight YOKE - VID:2547PID:41
0:19:50.918 I/JOY: UNREGISTER Joystick device: Saitek Pro Flight Quadrant - VID:1699PID:3117
0:19:50.918 D/HID: HID Bridge Shutdown
0:19:50.918 I/NET: UPnP remove redirect OK: port 49010
0:19:50.918 I/NET: UPnP remove redirect OK: port 49000
----- X-Plane has shut down -----
I have a physical cockpit, so disabling ZHSI or OCUSBMapper plugins is not an option for me...
Log - Copy.txt
2022.02.16-00.43.45-log.txt