[Static jetway connectors required]

17 hours ago, furrer411 said:

Do you think static jetway connectors will be available? I wanted to add SAM jetways to EDDE Erfurt, but they were too short to be connected to the terminal.

+1 - This is a must. Can we expect some options soon @Marten@Stairport? These jetway and wall extensions are from Laminar stock lib and they do not match at all

[Jetway not connecting to A320 Ultimate]

Well, I wouldn't know about the departure as the scenery was not furnished with SAM jetways

[Jetway not connecting to A320 Ultimate]

Just to make this clear, the Jetway I set up in my scenery project docked to FF A320 automatically. This was a nice surprise for me after a long flight I also have a video from replay but cannot share a link here - or I don't know how to . 

[10000 M RANGE]

Is it really necessary to have a range of 10000 m (10 km) while selecting a nearby docking object or Jetway? If you have more than a few within the close vicinity, selecting a proper distance is too hard with this kind of a range. Could this be allowed to be set by the user or better reduce it to 500 m or so. I am sure you have your reasons but just had to ask

regards.

[Safegate_5.0m_pole.obj]

I placed this object only to see that the pole of it is missing, all 4 of them - or is it me?

 

[FF A350 Docking]

Just started the A350 with engines running at one of the gates with double jetways and probably there are some changes with the new update.

1- The start-up positioning is 1M behind Neutral position.

 

2 Docking was successful although that 1 M difference showed up here. (Unfortunately, did not have the chance to test with Non beta version of A350).

 

Happy Holidays.

 

[Jetway penetration]

Interesting difference. I am using a 5.0 m Type 1 solid jetway and loaded the template for it before selecting Force connect but did not give it a name label and did not save it before doing so - if that matters at all. Will try to send the file or link via PM if I can right now.

[Jetway penetration]

Well,  I exactly followed your instructions and the end result is the same. Using default B737-800 from XP 11.30r1. 2 screenshots taken within a second before and after Force connect selected.

[Jetway penetration]

Thanks, will try that.

[Jetway penetration]

With 1.0.1 update, the jetway penetration into the aircraft is way too much for both default Boeing aircraft (LF1 for B738 and LF1 and 2 for B744), can this be corrected?

Is it not possible to have the final docking positions saved for each aircraft or is it asking for too much?

Thanks again for this intelligent plugin.

[JETWAY Animation not starting]

This happened to me when the Min and Max limits of the jetway was not corresponding to the door height of the aircraft. After correcting it, the second Jetway connected to the LF2 gate of B744 (default) along with the first one.