Digital Replica Cessna 310L

[Joe_K]

Out of the VR Lab: Digital Replica Cessna 310L VR

This update tweaks nearly everything to work better in VR. I worked very hard to make things just act and “feel” as right as they can.  Also, we give you teleport hotspots at the ailerons, elevator, and rudder and make them moveable with VR controllers, so you can do your walkaround checks.  This aircraft is still getting regular updates and the SimVRlabs VR mod will be updated as needed to maintain functionality!

 

Manipulators that have been tweaked to work in VR are:

-ADF frequency handle tuned for VR controller rotation
-Autopilot pitch control tuned with haptic detent at "level"
-Prop levers
-Haptic feedback detents everywhere you’d expect them
-OBS knobs
-Trim wheels and knobs
-Cowl Flap Handles
-Transponder knobs
-GPS knobs
-Autopilot heading knob
-Mode knobs
-Fuel Selector Knobs
-Reflections dialed back a bit for VR intensity
-Ailerons, elevator, rudder are grab-able, move-able *(see "what's new" below)
-Hotspots in every seat
-VR Yoke added and tuned

What's new in V101:  Mod is now compatible with the 1.0.8 Digital Replica 310L update.  Move-able ailerons, elevator, and rudder feature has been suspended until further official updates are released.

What's new in V102:  Bug with the small GPS freq dial is fixed.  Magnet added for "x-pad", now it spawns on a magnet spot on the pilot side door.  Easy to take off, reposition, and put back on.  Visible green click spot removed from elevator trim wheel, battery amp meter switch, and ADF dial for visibility (functionality is the same).  Light rheostat knobs now have variable-brightness knob like behaviour, instead of "toggle on or off"behaviour.

What's new in V103: Now compatible with the excellent 1.0.9 update.

What's new in V104:  Now compatible with the 1.10 update, adding the new icing switches and updated cowl handles.  The BEST way to update this one is to completely delete your 310 folder, don't just let the x-aviation installer overwrite the files. Remove the aircraft completely from x-plane before you install the latest version of the aircraft. Then run the installer to install the aircraft. THEN apply the SimVRlabs files.

 

Installation Instructions:

I recommend making a backup copy of your X-plane 11/Aircraft/X-Aviation/Cessna 310L folder.  Just rename it to something like Cessna 310L Old, so you can easily just revert back if you need to.

Step 1. Unzip the file and you’ll find 2 files.   Add both the Cessna_310L_vrconfig.txt file and the Cessna_310L_cockpit.obj to your Aircraft’s root folder, overwrite.  Keep the zip file on your computer so you can re-apply the SimVRlabs mod after any updates that come your way.

Step 2.  Enjoy!

 

Disclaimer: This is not an officially supported Digital Replica update, so don’t expect support from them on it. If you need help you can always ask me or just revert to your backed up folders. If you lose the old files and just want to reset everything just reinstall the aircraft.

 

------------------------------------------------------------------------

You must be a member of the club to download any files so please go ahead and join up, otherwise you will get an error.

 

 

SimVRlabs Digital Replica Cessna 310L V104.zip

Edited April 21, 2019 by Joe_K