Jump to content
  • Don't have an account?

    An account is required to interact with and download content from the Threshold Forum.
    Forum is currently also locked down for guests because of heavy bot invasions. Sorry about that.

  • WELCOME TO THE DOWNLOADS PAGE

    DOWNLOAD: Use the category list on the right to find your category of files or use the search box to find what you want.

    UPLOAD: To upload use the submit a file button on the right. Please upload to the right category. If you can't find the right category upload to "Other".
    Uploading files requires permissions. For instructions how to upload and who is allowed to upload what - check out the upload rules.
    If a category is missing please contact an admin to have it added.


    Note: Stowaway class has a 5 second download limitation to avoid hammering. Read the forum info page on how to upgrade.

52 files

  1. FScenery URMO Vladikavkaz 1.0

    Аэропорт Владикавказ (Беслан) (ИАТА: OGZ, ИКАО: URMO) — международный аэропорт федерального значения города Владикавказа, единственный аэропорт Республики Северная Осетия-Алания. Расположен неподалёку от города Беслана, в 26 км от Владикавказа. Занимает третье место по пассажиропотоку среди аэропортов Северо-Кавказского федерального округа. Обслуживает Владикавказ, Беслан и все остальные пункты Республики Северная Осетия-Алания, используется также жителями соседних республик (в частности, Республика Ингушетия и Республика Южная Осетия).
    В 2019 году аэропорт обслужил 0,566 миллиона пассажиров и находится на 42-м месте в рейтинге аэропортов России по пассажиропотоку.
    Эксплуатацию аэропорта осуществляет ОАО «Международный аэропорт Владикавказ», входящее в холдинг Новапорт.
    Аэродром Владикавказ включает в себя 2 рулежные дорожки и асфальтобетонную ИВПП размером 3000*45 метров, способную принимать все основные типы воздушных судов, в том числе Ту-154, Boeing 737-300, Boeing 737-400, Boeing 737-500, Boeing 737-800, Boeing 757-200, Airbus A319, Airbus A320, Airbus A321, Embraer 135/140/145/170LR/190/195; CRJ-100/200/440/700/705/850/900/1000; Sukhoi Superjet 100 и все более лёгкие, а также вертолёты всех типов.
    Оборудованные места стоянок способны разместить до 15 воздушных судов одновременно.
     
    Scenery supported X-Plane 12
    VK: https://vk.com/focusscenery

    32 downloads

       (0 reviews)

    0 comments

    Updated

  2. Reus Airport (REU; LERS)

    Reus Airport (IATA: REU; ICAO: LERS) is a commercial airport located near the coastal region of Costa Daurada, in the Tarragona province of Spain. It is located between the towns of Reus and Constantí, and lies approximately 8km away from the center of the province's capital, Tarragona. Its 2,459m long runway sees an array of airlines such as Ryanair, TUI Airways, Jet2, Iberia Regional and more. On average, just under a million passengers pass through its terminal each year, heading to and arriving from various destinations across Europe.
    This scenery is an accurate representation of the airport, including an assortment of fully custom 3D models with high-quality PBR textures and HDR night lighting. The package includes: High quality custom 3D models of all airport buildings, paired with high-quality PBR textures High-resolution PBR ground textures from RA_Library and MisterX_Library A realistic airport layout Custom HDR night lighting To install, simply download and unzip the file called "Reus vX.X.X" and place its two folders inside your 'Custom Scenery' folder in your X-Plane main directory, and make sure to install the required libraries too (MisterX_Library, RA_Library, ALES_DEV_LIB, OpenSceneryX).
     
    I hope you enjoy the scenery - happy flying!

    80 downloads

       (0 reviews)

    0 comments

    Submitted

  3. Frankfurt Intl. updated gate textures

    This texture pack updates the gates at EDDF Frankfurt to the new Total Energies label.
     
    To install this mod, simply unzip your download and copy the "SAM" folder into "EDDF - Frankfurt_3_Scenery" in your custom scenery folder. When your system asks you to overwrite the existing file, click on yes.
     
    If you like my work, you may consider to leave a tiny donation ^^ click me
    If you have any questions, feel free to ask them 🙂  
     
    Happy landings 😁
     
    Disclaimer:
    My old account has been hacked and got therefore removed. I am reuploading all my mods from time to time on this new account. If there are any uncertainties, feel free to contact me.

    102 downloads

       (0 reviews)

    2 comments

    Updated

  4. ENJB Jarlsberg

    Tønsberg Airport, Jarlsberg (Norwegian: Tønsberg flyplass, Jarlsberg; ICAO: ENJB) is a general aviation airport located at Sem in Tønsberg, Norway. It consists of a 799-by-18-meter (2,621 by 59 ft) asphalted runway and a 900-meter (3,000 ft) taxiway. Jarlsberg is used for a variety of activities, including glider pilots, light and microlight aircraft, radio-controlled aircraft, parachuting and the annual air show Wings & Wheels. The airport is owned by Thor Solberg Aviation and operated by Jarlsberg Luftsportssenter.
    The airport opened in 1937 and was taken over by the Luftwaffe in 1940. It was at first used as a dummy airfield, but from 1944 the Luftwaffe carried out upgrades. These were not finished by the end of Second World War. Jarlsberg was from 1947 to 1959 used by the Royal Norwegian Air Force (RNoAF), although the functions were eventually taken over by the nearby Sandefjord Airport, Torp. Braathens SAFE operated scheduled services from 1952 to 1959, and later also Thor Solberg and Fred. Olsen Airtransport also operated scheduled services. Activity has been limited to various general aviation activities since the late 1960s.
    (Copy/paste from Wikipedia)
    Please do report bugs.
    Orthophotos for this region are recommended. NO source seems to be the best choice as seen in the screenshots. ( screenshots are with NO source --> mask 20 - ratio 0.2 )
    A description on how to get NO source for ortho can be found here: https://forum.thresholdx.net/topic/5-ortho4xp-master-source-list/
    I also recommend Norway Pro VFR Scenery found here: http://forums.x-plane.org/index.php?/files/file/32684-norway-pro-vfr-scenery/

    How to install:
    1: Unpack contents of the .zip file and copy it to the x-plane/custom_scenery folder.
    2: This scenery has library dependencies!
    Install these libraries into the same folder and alongside the Airport. (X-plane/custom scenery)
         Open Scenery X http://www.opensceneryx.com/
         MisterX library http://forums.x-plane.org/index.php?/files/file/28167-misterx-library-and-static-aircraft-extension/
         GT Library http://forums.x-plane.org/index.php?/files/file/29461-ground-textures-library/
         RuScenery http://www.x-plane.su/projects/ruscenery.html
         R2 scenery http://r2.xpl.cz/
         HandyObjects http://forums.x-plane.org/index.php?app=downloads&showfile=24261
         3D People http://forums.x-plane.org/index.php?app=downloads&showfile=26611
         BS2001 Object Library http://forums.x-plane.org/index.php?%2Ffiles%2Ffile%2F28045-bs2001-object-library%2F
         R Design Library http://rdesignx.weebly.com/freeware.html
         CDB Library http://forums.x-plane.org/index.php?%2Ffiles%2Ffile%2F27907-cdb-library%2F
         I know this list is long... sorry about that - but all are found in the master source list
         http://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/

    Remember to put the new libraries and the airport in the right order in the custom_scenery.ini file.
    Aaand you're good to go.

    For general XP11 instructions and useful info, have a read in the Beginners guide.
    Want to buy me a beer? I love beer! Use this: paypalme

    185 downloads

       (0 reviews)

    0 comments

    Updated

  5. ESSG - Ludvika

    Ludvika flygplats (IATA: –, ICAO: ESSG) is a small regional airport south of Ludvika in Dalarna in central Sweden. The field opened in 1968 and were mainly used for business traffic to local companies. This traffic ended after a few years but the field is still held open by the local club.
    More images can be found here: https://photos.app.goo.gl/vy3ezfyqMqM6Tq4y5

    ❤️If you enjoy our work you can support us by sending a coin or beer to: http://paypal.me/DanielMartinsson
    All time we invest in building sceneries and liveries is done in our free time outside regular daytime work and families. Any donation is welcome as it allows us to dedicate more time on X-plane, something that will be returned to the community as more airports and airplane liveries. ❤️
     
    INSTALLATION AND REQUIREMENTS
    It's recommended to use ortho photos to get the most of the airport but it will work just fine without it as well.
    As always, paste the entire folder to: X-Plane 11\Custom Scenery
    The following libraries are required.
    MisterX6: https://forums.x-plane.org/index.php?/files/file/28167-misterx-library-and-static-aircraft-extension
    CONTACT
    If you have problem, ideas or suggestions, please contact us at: daniel@xdc.se
    You can also find us at our Discord server at: https://discord.gg/BHBCWbP
     
     
    COPYRIGHT AND CREDITS
    All of the brands, colors and names used in this package belong to the respective owner.
    This product is originally uploaded to the thresholdx.net and xplane.org community websites. Uploading this package to any other site without the author's permission is prohibited.
    We’d like to thank the members of the Swedish flightsim community for the support we have gained over the years. A big thanks to all our beta testers for helping us with the final versions.
     

    16 downloads

       (0 reviews)

    1 comment

    Updated

  6. LOWS Salzburg update

    1. Download the file
    2. Unzip the LOWS Salzburg.rar
    3. Drag and Drop the file into your Custom Scenery folder
     
     
    I had updated the scenery a little bit you can find the original scenery on the link below
    https://forums.x-plane.org/index.php?/files/file/44342-lows-_-salzburg-airport/

    What's New?

    I had edited the runway and a little bit the taxi wayes textures.
     
     

    35 downloads

       (0 reviews)

    0 comments

    Submitted

  7. Ísafjörður Airport | TPDS

    Iceland is calling!
    Fly the country's most challenging approach while following the fjords into Ísafjörður. This new freeware scenery for X-Plane 11 is a highly detailed rendition of Ísafjarðarflugvöllur (Ísafjörður Airport) with custom hand-made objects and buildings to please the eye. Detailed lighting and night effects are also included in order to top the appearance off. I would recommend to practice first to really nail that landing when it matters the most. We at TPDS wanted to give something back to the flight simulation community and we are doing that in a hassle-free and simple way by having all the custom assets made in-house, meaning that no libraries are required!
    Features:
    Highly detailed Ísafjörður Airport (BIIS)
    Accurate, highly detailed building models with 4K textures
    Custom runway and ground textures
    Accurate approach lighting based on Isavia charts
    Optimized for best computer performance
    Detailed ground layout
    *Orthophotos need to be downloaded separately due to legal reasons
     
    Charts and procedures can be found in Isavia's eAIP
     
    Join our Discord!
     
    Donations are far from expected but are always welcome to keep our team happy!
     
    Sincerely, ToasterPilot & Karim Atrach
     

    234 downloads

       (2 reviews)

    2 comments

    Submitted

  8. Northwest Regional Airport Terrace-Kitimat X Plane 11

    The Northwest Regional Airport Terrace-Kitimat is the main airport for Northwest British Columbia. With recent industrial activities beginning to takeoff there is a lot of traffic landing on runway 33/15. Nestled in a valley there are plenty of interesting approaches including a circle to land on runway 15 (which is really fun in larger aircraft). The airport is commercially served by Air Canada, WestJet, and Central Mountain Air to Vancouver and Prince George. However, through the ONEC Logistics Hanger/Terminal the airport also is the destination for multiple Fly in Fly out Programs served by Canadian North, Summit Air, North Cariboo Air, and Pacific Coastal. There are also no shortage of helicopter operations in the region, the NWRA has bases for Canadian Helicopters, Great Slave Helicopters, Summit Helicopters, and Quantum Helicopters. Mill's Memorial Hospital in downtown Terrace also serves as the regions main medical facility, Executive Flight Centre located on the east side of the airport services many medevac flights a week arriving from places like the Nass Valley and smaller airports located near the mines up north. There is no shortage of fun operations at the Northwest Regional Airport and with a great scenery like this, why not come give northwest British Columbia a visit!
    This airport does use SAM and you will therefore need SAM Suite
    Libraries Needed (Without the latest versions the airport will not work)
    https://forums.x-plane.org/index.php?/files/file/28167-misterx-library-and-static-aircraft-extension/
    https://forums.x-plane.org/index.php?/files/file/26611-3d-people-library/
    https://forums.x-plane.org/index.php?/files/file/27907-cdb-library/
    https://forums.x-plane.org/index.php?/files/file/17090-flags-of-the-world-real-flag-ii/
    https://forums.x-plane.org/index.php?/files/file/24261-the-handy-objects-library/
    https://forums.x-plane.org/index.php?/files/file/45410-ra-library/
    RD Library https://rdesignx.weebly.com/freeware.html
    https://ruscenery.x-air.ru/
    https://forums.x-plane.org/index.php?/files/file/2226-opensceneryx/ 
    https://forums.x-plane.org/index.php?/files/file/53427-ales-developer-library/
    You may encounter a message saying that X Plane could not properly load the scenery upon loading into the sim. This is bug and does not impact how the airport looks. I am currently trying to find a fix and will update the airport once one has been found. 
    This scenery does use assets created by Canada4XPlane, with their permission.
    You may not redistribute any of the assets you get from downloading this airport, they are property of myself and Canada4XPlane. This scenery is in no way affiliated with the Northwest Regional Airport Terrace-Kitimat, all rights reserved.

    240 downloads

       (3 reviews)

    2 comments

    Updated

  9. Evenes XP

    This is a freeware scenery of Evenes (ENEV) made by me (Kristian)
    I have taken my time to create this Evenes scenery. I hope this is something you will find usefull.
    This pack includes two folders. (Evenes XP Flattened and Evenes XP Sloped) 
    The Evenes XP Flattened, flattens the whole airport. This is made due to the Evenes flystasjon terminal is very uneven in the sloped version, so if you prefer better visual results this is strongly recommended.
    The Evenes XP Sloped makes the airport follow the terrain mesh. If you use Ortho4XP i strongly recommend you set the "apt_smoothing_pix" to 8 in the Ortho4XP settings, this has given me the best results. This version (Evenes XP Sloped) is recommended if you want it more realistic.
    Overall i recommend the Evenes XP Sloped if you`re flying IFR flight in and out of Evenes.
    -INSTALL-
    1. Unzip the folders
    2. Copy whichever version of Evenes XP you want installed (Evenes XP Flattened or Evenes XP Sloped)
    3. Paste the folder of your choice into your custom scenery folder (\X-Plane 11\Custom Scenery)
    Enjoy!
     

    187 downloads

       (0 reviews)

    0 comments

    Submitted

  10. LTBJ Izmir Adnan Menderes Intl. Airport v.3

    LTBJ İzmir Adnan Menderes Intl. Airport Senaryosu / Scenery 
    LTBK Gaziemir senaryosunu da içermektedir / Including LTBK Gaziemir Military Training Airfield.
    This scenery is one level up based on the previous version and almost all 3D models are made from scratch to give users a better
    immersion while using it. We hope this version adds to your joy you get out of your flight simulator.
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    Installation options:
        For those of you who want the easy installation, just extract the _LTBJ_Izmir_v3 folder in your Custom Scenery folder and start your
        X-Plane 11. If you have all the required library folders in place it should open up without a problem.
        By default, if you had already selected "Runways follow terrain contours" option from X-Plane Settings/General tab you will have
        a natural (slightly) sloped airport area. If not, you will have your scenery flat as a dining table.
        Having said that, although the airport area seems flat from a distant view, the slopes and elevation differences causes some
        parts of the huge 3D models like the terminal building to partially float over or sink inside the terrain and if you are not 
        comfortable with this, you should then continue reading:
    1-    "Flatten" this scenery within X-Plane by replacing the Earth nav data folder located in the main package with the one provided in
        "Flat" folder. Restart you XP, you are good to go. You can always revert this by copying the Earth nav data folder over the current one
        from the "Natural" folder or extract the whole scenery package again. This is the easy option.
    2-    Extract the provided yOrtho4XP_Overlays.zip file to your Custom Scenery folder. If you already have this file then it is
        up to you to overwrite it or not. This one is extracted from Alpilot's HD Mesh v4.
        You will find zOrtho4XP_+38+027.zip file in the package which was created using Ortho4Xp by Oscar Pilote at ZL14. Extract the contained
        folder to your Custom Scenery folder and re-arrange your scenery_packs.ini file. If you want a higher ZL ortho package, continue reading.
    3-    If you want to create your own tile for the region, copy the provided "Patches" folder (which was created with JOSM) to your Ortho4XP 
        folder and run O4XP to create the tile +38+027 at the desired ZL. If you already had the orthophotos downloaded previously, then it 
        shouldn't take more than 5-6 minutes to re-create the tile with this patch. This patch arranges the apron and runway elevations / slopes 
        so that the 3D objects are placed properly on ground. The elevation data of LTBJ was obtained from official Airport Obstacle Chart. If you
        don't use the patch file, you will still have a scenery similar to the default mesh where you have some parts of the buildings floating and
        some parts sunken. The choice is yours. 
    Required Libraries
    MisterX_Library
    NAPS_Library
    OpenSceneryX
    SAM_library (and plugin)
    IMPORTANT:
        This scenery is NOT to be used in ANY type of COMMERCIAL simulators and the only way for this to happen is 
    to obtain our written consent after making a minimum donation of €500 (Euro FiveHundred %00 or equivalent in local 
    currency) to : LOSEV Leukemia Foundation for Children. https://www.losev.org.tr/v6/
        For those who intend to use this scenery in their personal computers for their personal joy, it is free of
    charge but they can also make ANY amount of donation they wish to make to the same foundation mentioned above.
    Based on the information in the website, all credit cards with 3D secure payment can be used.
    Enjoy your flights to and from Izmir.
     

    1,262 downloads

       (6 reviews)

    0 comments

    Submitted

  11. EGPN - Dundee Airport [BETA!]

    -----------------------------------------------------------------
    --------------------
    EGPN -> Dundee Airport (By Mathio)

    Thank you for downloading my scenery.

    RECOMMENDED!!
    1. Download Ortho4XP! Makes it look so much better (Credit to the Ortho Team!)
    Link : https://drive.google.com/file/d/1PWgp33gDUQbY3uZmYbTi3ccMPLIJMQAQ/view
    2. Join my discord to recommend features! 
    Link : https://discord.gg/76bVsG2xGC
    IMPORTANT!!
    THIS IS STILL IN BETA!!!!
    I WILL ADD CUSTOM MODELS SOON!
    IT MAY HAVE SOME ISSUES USE DISCORD TO REPORT THEM.
    PLEASE RESPECT THAT I HAVE A LIFE OUTSIDE OF THIS SO IT WILL TAKE TIME TO BE OUT OF BETA.

    NEEDED ADDONS:
    (THESE ARE ALL FREE)
    MISTERX : MisterX Library and static aircraft extension - Libraries for Scenery - X-Plane.Org Forum (x-plane.org)
    3D PEOPLE LIBRARY : 3D people library - Libraries for Scenery - X-Plane.Org Forum (x-plane.org)
    SAM : Scenery Animation Manager - Suite - X-Plane.Org Forum (x-plane.org)
    RE LIBRARY : RE_Library - airport buildings and related objects - Libraries for Scenery - X-Plane.Org Forum (x-plane.org)
    OPENSCENERYX : https://www.bing.com/search?q=OPENSCNERY+X&cvid=b9ac7e964e2a4fcc8650775b00b7773c&FORM=ANAB01&PC=NMTS
    PP LIBRARY : Pavement paintings library (PPlibrary) - Libraries for Scenery - X-Plane.Org Forum (x-plane.org)

    35 downloads

       (1 review)

    2 comments

    Updated

  12. LTFM Istanbul Airport, Turkey

    LTFM Istanbul Airport for X-Plane 11 (11.50+)
    Version 2.0

    October 29, 2020 is the 97th Anniversary of the Turkish Republic and LTFM Istanbul Airport is now 2 years old (officially) and this scenery is released today on the 29th to commemorate the official opening. Release of LTFM v1.0 was also on October 29, but that was 2 years ago.
    This is a NEW rendition of LTFM from ground-up and has only a handful of objects in common with LTFM Istanbul v1.0 such as the ATC tower and few more objects. We had been working on this scenery since the first package was shared. It is a huge complex and we had to create lots of new 3D models to fill up the vast area - even the ones that are not completed yet IRL are already placed in their actual positions - as close as possible of course. I lost count how many taxi signs I had to create and how many times I had to draw lines and polygons. So did M. Ali as he repeatedly revised and re-exported his 3D models to create the best possible objects. We placed hundreds of parking slots to their RL positions and draw all markings as accurate as we possibly could based on the available satellite imagery and yet we need more time to call it "finished". 
    eg. ALL Terminal Gates are furnished with SAM jetways and a marshaller or DGS panel. All Apron parking positions are also furnished with either a marshaller or a DGS panel from SAM library. Gates and parking positions with L and R suffixes are for Cat C and smaller aircraft and only one jetway will approach the aircraft at terminal gates. The main gates (eg. D12, B2) are for Cat D and above aircraft and 2 jetways will approach them (provided the add-on has animated gates) but Cat C and smaller can also park at those positions with only one jetway approaching.
    Parking positions are named such that they show "highest" Aircraft category like D12-(E) or 131-(C) or G11L-(C).
    PS. During my tests, I found out that FF B777-300ER has a problem and jetways do not connect to this add-on, B777-200LR is ok.
     
    Anyhow, here it is and it is AS IS therefore no need to complain about missing parts, we all know what they are.
    *******REMOVE ANY PREVIOUS "LTFM" SCENERY THAT YOU ALREADY HAVE BEFORE INSTALLING THIS VERSION*******
    There are 2 options to select from: A - FLAT and B - NATURAL
    I will share 2 separate packages to avoid problems for those who does not care about slopes and tunnel entrances. As the file names are self explanatory, I will ONLY explain installation details in depth for NATURAL version. Select whichever you want. Both packages contain base ZL19 "airport" orthos.
    PLEASE READ CAREFULLY BEFORE ASKING FOR HELP OR COMPLAINING AND MAKE SURE YOU HAVE ALL NECESSARY LIBRARIES (PROPERLY) INSTALLED.
    Required libraries / plugins:
    - BS2001 Objects Library
    - CDB-Library
    - TFS_Aircraft_Library
    - The_Handy_Objects_Library
    - MisterX_Library
    - OpenSceneryX
    - SAM_Library and Plugin (freeware)
    If you do not already have the libraries used in this package, you may find download links in the Master Library 
    List: http://forums.x-plane.org/index.php?showtopic=90776
    After making sure you have all necessary libraries, proceed to INSTALLATION:
    FLAT option is a FLATTENED version of the NATURAL scenery so there are no slopes and tunnel entrances or elevated terrain; it looks just like a dinner table. For this option you do not need to worry about "Runways follow terrain contours" setting as it will not have any affect. Simply copy the _LTFM_Istanbul_Intl_v2.0 folder from the LTFM_FLAT.zip file in your Custom Scenery folder and start X-Plane 11 and enjoy.
    For NATURAL option, we had to work a lot and we still need to work further to make the scenery reflect the reality. As the default X-Plane 11 mesh and the mesh obtained during ortho creation are both very much outdated, we decided to create a "patch" for the airport area using another magical tool named JOSM.
    We used official AIP charts as our reference for the elevations at certain points of the airport area and used cross section charts to create the actual slopes of each and every one of the 5 current runways - as much as we could, of course.
    Nearly all buildings we could spot from publicly shared videos and photos have been modelled and placed as close to their actual coordinates as possible.
    To install the LTFM (NATURAL) scenery, simply extract the "_LTFM_Istanbul_Intl_v2.0" folder from LTFM_NATURAL.zip file to your Custom Scenery folder .
    PS. If you had previously installed my _LTFM_Istanbul_GWS110 NATURAL scenery along with it's overlay and ortho files you do not need to reinstall them, just unpack this new _LTFM_Istanbul_Intl_v2.0 folder from LTFM_NATURAL and place it in your Custom scenery folder, re-arrange your scenery_packs.ini file and start your XP 11 but you still need abovementioned libraries and plugin.
    BUT... If you do not copy provided Overlay and Ortho folders or create your own high ZL tile using the provided "patch" file and add them to your Custom Scenery folder, the outcome may not be so pleasant. Therefore, please carefully read and apply below instructions. Also, the "Runways Follow Terrain Contours" option MUST be "selected" in the General Settings tab otherwise the scenery will NOT be rendered as intended and you may have an unexpected FLAT or RAW outcome.
    Installation for Ortho4XP users for NATURAL version:
    I am sharing the Overlay files off of Alpilot's HD Mesh v4 (yOrtho4XP_Overlays.zip) and also the ZL14 Ortho4xp files for the region (zOrtho4XP_+41+028.zip). Just extract the folders contained in these 2 zip files to your Custom Scenery folder along with the _LTFM_Istanbul_Intl_v2.0 folder. Finally you should have 3 NEW folders:
            _LTFM_Istanbul_Intl_v2.0
            yOrtho4XP_Overlays
            zOrtho4XP_+41+028        and these should be added to your scenery_packs.ini file in similar order - see 
                                                       below example. There may be other items in between. Make sure that you do not 
                                                       already have ortho files for the mentioned tile and if so move them out to a safe
                                                       place before you proceed copying these - just in case. You should remove any 
                                                       other LTFM scenery package(s) or DISABLE them in your scenery_packs.ini file.
        ....
        ....
        SCENERY_PACK Custom Scenery/_LTFM_Istanbul_Intl_v2.0/
        ....
        ....
        SCENERY_PACK Custom Scenery/yOrtho4XP_Overlays/
        ....
        ....
        ....
        SCENERY_PACK Custom Scenery/zOrtho4XP_+41+028/
        ....
        ....
    For people who wants HIGH ZL Orthos:
    You can also use the contained "patch" file to create your own high ZL orthos with Ortho4XP. For this, you need to copy the "Patches" folder to your Ortho4XP main folder and run Ortho4XP. The file location should look like this     ...\Ortho4XP\Patches\+40+020\+41+028\LTFM.patch.osm
    If you understood what I wrote above, you should be able to create a high ZL tile with Ortho4XP without a problem, otherwise watch some YT videos.

    IMPORTANT:
        This scenery is NOT to be used in ANY type of COMMERCIAL simulators and the only way for this to happen is to obtain our written consent after making a minimum donation of €2000 (Euro Twothousand %00 or equivalent in local currency) to : LOSEV Leukemia Foundation for Children. https://www.losev.org.tr/v6/
        For those who intend to use this scenery in their personal computers for their personal joy, it is free of charge but they can also make ANY amount of donation they wish to make to the same foundation mentioned above. Based on the information in the website, all credit cards with 3D secure payment can be used.
    **********************************************************************************************************************
    We do not need donations for a cup of coffee or a pint of beer but those kids need that money for their treatment.
    **********************************************************************************************************************
    Our special thanks goes to
        Oscar Pilote for Ortho4XP 
        Everyone who contributed to JOSM tool 
        Marten for SAM plugin
    and    Creators of all Object Libraries publicly shared.
     
    Please respect copyright. Do not use and share Custom objects in any other scenery without the consent of the authors:
    M. Ali Oguducu, Kamil Uzun (MXI) and Muhtesem Firtina Ozcinar.
    Enjoy your flights in and out of Istanbul.
    Hayri Buberci / M. Ali Oguducu / Kamil Uzun / Muhtesem Firtina Ozcinar
    Oct 29, 2020
    #\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#
     

    7,416 downloads

       (16 reviews)

    41 comments

    Updated

  13. LTFM Istanbul Intl.

    LTFM Istanbul Airport for X-Plane 11 (11.30+)
    Version GWS1.0 NATURAL (Sloped) and FLAT versions.
    This is a slightly enhanced rendition of my LTFM Istanbul (future) Gateway version, furnished with SAM jetways, DGS panels and marshallers for better immersion.
    If you want a full custom scenery please follow this link : 
     
    The new layout includes RWY 18/36 which is due to open next  week but there are no instruments yet to guide you to approach them. They will be added most probably with the next update of  AIRAC files. 
    Complete layout was redrawn based on more than 100 google Earth Pro hi-res screen shots stitched together and all ground markings, direction and location signs along with gate/ramp numbers are placed as close to real life as possible.
    As the default X-Plane mesh is still very much outdated along with the mesh created during orthophoto creation using Oscar Pilote's Ortho4XP, I made a patch file for the airport area using JOSM tool. I used official AIP charts to obtain the elevations at certain points of the runways and aprons and also used cross section obstacle charts to create the actual slopes of each and every one of the 5 current runways.
    Installation instructions are in the readme files.
    Required libraries (thanks to their authors):
    - BS2001 Objects Library
    - CDB-Library
    - Europe_Library
    - FJS_Scenery_Library
    - The_Handy_Objects_Library
    - MisterX_Library
    - OpenSceneryX
    - SAM_Library and plugin
    If you do not already have the libraries used in this package, you may find download links in the Master Library List: 
    http://forums.x-plane.org/index.php?showtopic=90776
    Else Google is your friend.
    No lock is strong enough to stop thieves. Please respect Copyright.
    Enjoy.
    H Buberci
    June 14, 2020

    962 downloads

       (5 reviews)

    0 comments

    Updated

  14. LTFJ Istanbul Sabiha Gokcen

    The link on this page will take you to the download page of v2.
    LTFJ - Sabiha Gokcen International Airport - Istanbul/TURKIYE
    This scenery is a re-work of my previous one that I had published about 3 years ago using a scenery from
    forums.x-plane.org site which was published and shared by Randy Westline as a freeware at that time. Custom
    Terminal Buildings and some others around the airport belong to that scenery as before. I also used many
    other objects from various freeware object library along with a couple of custom apron light objects with
    the consent of the creator, Kamil Uzun.
    I also implemented the recently published SAM jetways and DGS panels which means I have to thank the authors
    for creating and publishing it as a freeware plugin for freeware scenery authors. Thank you Marten. With
    this plugin, you can have 2 jetways docking to a Cat D or higher aircraft if you select the appropriate
    Gates for them (201 to 208-HJ Gates). All the rest of the Gates (201A & B to 208A & B) have single jetways
    for up to Cat C aircraft. All ramps are furnished with either a Docking Guidance System or a marshaller and 
    marshallers only appear when you come close to the ramp or gate, otherwise they are not visible.
    You need to obtain the library and the plugin from this link and follow instructions for installation.
    https://forum.thresholdx.net/files/file/122-sam-scenery-animation-manager/
    X-Plane 11 native ATC Flows, Ground traffic and ATC Routes are working flawlessly. All ramp starts are placed
    at their actual coordinates and all except 5 (ramps 4 to 8 ) of the ramps are in place. Scenery is also X-Life 
    ready. LTFJ.xlf file is included in the package and you need to carry it over to 
    ../Resources/plugins/X-Life/Airports folder for it to work.
    I created and tested this scenery WITHOUT selecting the "FLATTEN" option because the default X-Plane 11 and,
    to some extent, Orto4XP v130 Mesh looked realistic enough and I like it this way. If your general X-Plane 11 
    "Runways follow terrain contours" setting is active/selected and
     - If you still want to have a FLAT airport, you need to copy the apt.dat file from FLAT folder to 
       ...X-Plane 11\Custom Scenery\_LTFJ_Sabiha_Gokcen\Earth nav data folder. 
     - If you want a natural sloped runway and apron, you can use the one that is placed inside the NATURAL folder
       which is the default option. 
    No static aircraft placed in this scenery, if you want them, select the "Draw parked aircraft" option in 
    X-Plane 11 > Settings > Graphics tab. You will see plenty of them for the eye candy if you have a powerful 
    video card. 
    You need the following library for this scenery to load and work properly:
    https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/
    BS2001 Object Library
    FJS_Scenery_Library
    MisterX_Library
    NAPS_library
    OpenSceneryX
    SAM_Library
    Tested both in X-Plane 11.26 and 11.30 with default mesh and with Ortho4XP 1.30 tiles and mesh.
    Thanks to Oscar Pilote for his great tool and to all Object Library creators.
    Installation: Extract the _LTFJ_Sabiha_Gokcen folder to your Custom Scenery folder. Disable/Remove previous
    scenery (if any).
    Enjoy your flight to and from Sabiha Gokcen.
     

    1,509 downloads

       (3 reviews)

    2 comments

    Updated

  15. LFBZ Biarritz Anglet Bayonne XP 11.50+

    LFBZ Biarritz Anglet Bayonne
    Biarritz Pays Basque Airport est un aéroport Français situé dans les communes d’Anglet et biarritz dans le département des Pyrénées-Atlantiques et la région Nouvelle-Aquitaine, fondée dans les années 1950.
    Pour X-plane V 11.5 et +
    OpensceneryX
    Bibliothèque MisterX
     

    207 downloads

       (0 reviews)

    0 comments

    Submitted

  16. LIPQ Trieste “Friuli Venezia Giulia” by ADM Simulation

    Hi guys, making a scenery it's very hard and it takes a lot of time. If you like our job, a Donation is 100% optional but it will be greatly appreciated. It would be a way to support us!!! Thank you very much for your time. PayPal link below:
    https://www.paypal.com/paypalme/MatteoPierdona
     
    ---INSTALLATION---
    Copy the folder "LIPQ Trieste Friuli Venezia Giulia by ADM Simulation" into:   X-PLane 11/Custom Scenery

    ---LIBRARY REQUIRED FOR THE SCENERY---
    - PP Library                   
    - Mister X Library
    - handyobjects
    - RA_Library
    - opensceneryx
    - CDB-Library
    - 3D_people_library
    - BS2001_Objects
    - SAM library 2.0.7
    - ff_library_extended_LOD
    WE HIGHLY RECOMMEND TO DOWNLOAD THE LATEST UPDATE OF THESE LIBRARIES IN ORDER TO MAKE THE SCENERY WORKS!!!!!!!
    See you on internet, hope that you'll like it ;)).
    Alberto, Daniele and Matteo from ADM Simulation.
    LIPQ Trieste "Friuli Venezia Giulia"
    Created by ADM Simulation
    Don't forget to visit our Facebook page for future projects 😉
    https://www.facebook.com/ADM-Simulation-107344114376776/


    656 downloads

       (1 review)

    0 comments

    Updated

  17. LFOZ Orleans St_Denis_de_l_Hotel

    L'aéroport LFOZ d'Orléans Val de Loire est un aéroport français situé à Saint-Denis-de-l'Hôtel dans le département du Loiret en région Centre-Val de Loire.
    MisterX
    HandyObject
    OpenScenery

    56 downloads

       (0 reviews)

    0 comments

    Updated

  18. LGZA Zakinthos Dionisios Solomos

    Zante Dionýsios-Solomós International Airport (IATA code ZTH • ICAO code LGZA) is an airport serving the island of Zante, Greece, and located near the town of Kalamaki. It is named after the Greek poet Dionýsios Solomós, originally from the island.
    Planes are not allowed to take off or land from midnight until 4 a.m., in order to preserve an endangered species of turtles (caretta caretta) which come to lay their eggs on the beach during the night. The airport opened in 1972
    Version compatible with X-Plane 11.50
    I recommend using Ortho4XP.
    + 37 + 020
    The libraries required for this version are:
    https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/
    - GT_Librairy
    - SAM
    - JB_Library
    - PP_Library
    - R2_Library
    - OpenSceneryX
    - CDB_library

    127 downloads

       (0 reviews)

    0 comments

    Submitted

  19. LGPA Paros

    Paros National Airport (IATA: PAS, ICAO: LGPA) is the airport serving the island of Paros, in Greece, in the Cyclades Islands region. The airport is located in the southwestern part of the island, approximately 10 kilometers (6.2 mi) from the port of Parikia. It replaced Old Paros National Airport on July 25, 2016.
    The Old Paros Airport, located a few kilometers to the south, had been operational since 1982. Its 710-meter runway was sufficient for the time, but over the years the number of passengers has increased, making it necessary to l use of larger aircraft. Although these aircraft can serve various Greek airports, Paros Airport was not one of them. The reason was that the trail was short. It was finally decided that there would be a new airport for the island. The new airport opened in 2016 and takes over all operations from the old airport. It has a 1,400 meter wider runway and larger planes can use it. The types currently flying to the airport are: Bombardier Dash 8 Q400 from Olympic Air, ATR 42/72 from Sky Express, BAe 146 & ATR 42/72 from Astra Airlines and B737-700 from Travel Service.
    Since June 8, 2018, Smartwings, a Czech charter airline, is the first operator to fly regularly with a medium size jet in Paros. The flight is operated with a fuel stop at Santorini airport on the return journey, as no fuel is available in Paros.
    Olympic Air, a subsidiary of Aegean Airlines, financed both the construction of the first phase of the terminal and the infrastructure works for the new airport.
    .... My scenery are made to be used with the XP11 decor by default xplane ....
    It is a representation of the current airport
    Made on a Windows 10 64-bit PC
    This scenery is only for Xplane 11.20+
    PLEASE keep yourself updated with the necessary library files as the objects become larger and larger. My backdrops may not use all of these listed library files, but it's best to install them
    Use zOrtho4XP_+36+025 and zOrtho4XP_+37+025
    CDB-Library Version 2.4
    OpensceneryX,
    gt_library
    R_2 library,
    ruScenery,
    FF LOD Library
    The Handy objects library 6.2
    RE_Library 1.8,
    3D people library 3.8
    MisterX Library 1.51
    THE-FRUIT-STAND Aircraft Library v2.2
    BS2001 Object Library 1.1
    Flags of the World
    XAirportScenery
    Global models
    AutoGate plugin for a functional connection system.
    Most of the required libraries can be found in the list of main libraries:
    http://forums.x-plane.org/index.php?showtopic=90776
     

    92 downloads

       (0 reviews)

    0 comments

    Submitted

  20. LGML Milos

    The national airport of the island of Milos is an airport of Milos, in Greece IATA code: MLO • ICAO code: LGML • Greek airport code: modern Greek: ΚΑΜΛ, Milos is an island in the Cyclades. The airport is located 5 kilometers south-east of the island's port. The airport was opened on January 17, 1973. The types of flights to the airport are currently: Bombardier Dash 8 Q400 from Olympic Air and ATR 42/72.
    .... My scenery are made to be used with the XP11 decor by default xplane ....
    It is a representation of the current airport
    Made on a Windows 10 64-bit PC
    This scenery is only for Xplane 11.20+
    PLEASE keep yourself updated with the necessary library files as the objects become larger and larger. My backdrops may not use all of these listed library files, but it's best to install them
    Use zOrtho4XP_+36+024
    CDB-Library Version 2.4
    OpensceneryX,
    gt_library
    R_2 library,
    ruScenery,
    FF LOD Library
    The Handy objects library 6.2
    RE_Library 1.8,
    3D people library 3.8
    MisterX Library 1.51
    THE-FRUIT-STAND Aircraft Library v2.2
    BS2001 Object Library 1.1
    Flags of the World
    XAirportScenery
    Global models
    AutoGate plugin for a functional connection system.
    Most of the required libraries can be found in the list of main libraries:
    http://forums.x-plane.org/index.php?showtopic=90776
     

    66 downloads

       (0 reviews)

    1 comment

    Submitted

  21. LGKL Kalamata AB GEF

    Welcome to LGKL Civil Aviation International Airport and Kalamata Air Base located in the south of the Peloponnese (Greek region of Messina).
    You will enjoy the flight between the mountain and the sea over the olive groves.
    Good flight !
    Version compatible with X-Plane 11.50
    I recommend using Ortho4XP.
    + 37 + 021
    + 36 + 021
    + 37 + 022
    + 36 + 022
    Required library:
    https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/
    - GT_Librairy
    - SAT
    - JB_Library
    - PP_Library
    - R2_Library
    - OpenSceneryX
    - CDB_library
    - MisterX
    - The_Handy_Objects_Library
    - ruscenery
    - ORBX_library
    - x_prefab_library
    - Latest version of "simHeaven"
    https://simheaven.com/simdownloads/x-europe-4/
    NAPS_Library
    https://dl.dropboxusercontent.com/s/ndoxkzqlhz5clxz/NAPS_library_v7.2.zip?dl=0
     

    120 downloads

       (0 reviews)

    0 comments

    Submitted

  22. Lesce-Bled Airport

    Lesce Airport (LJBL) is a small airport in north western Slovenia, near the border with Austria. It is a popular airport for propeller aircraft and gliders. This scenery provides an accurate rendition of the airport, with realistic markings, textures and objects. It took about 2 months to create this scenery.
    Requires:
    RA_Library ALES Dev Library OpenSceneryX Includes:
    PBR Ground Textures PBR Object Textures Custom Objects Realistic Markings 3D Grass To install, make sure you have the latest versions of the libraries listed above, and then unzip the 'TAR_LJBL' folder into your 'Custom Scenery' folder.
    We also plan to constantly update and improve this airport.

    36 downloads

       (2 reviews)

    0 comments

    Updated

  23. ESSB Stockholm Bromma

    Stockholm Bromma Airport (IATA: BMA, ICAO: ESSB) is a European domestic airport in Stockholm. It is located 4 NM (7.4 km; 4.6 mi) west-northwest of downtown Stockholm and is the closest to the city compared to the other commercial passenger airports in the area around Stockholm (Arlanda, Skavsta and Västerås). Bromma was built in 1930 and was the first european airport to have paved runways from the start, the remainings of these can still be seen. Bromma is Sweden's third-busiest airport by passenger traffic and take-offs and landings as of 2019. 
    The X-plane rendition of Bromma started out as a small and simple project a few months ago. That intention failed quite fast as I, Daniel, found a lot of new areas to improve. My friend Oskar joined me and we have completed building by building, added more details and improved the area over time. 

    More screenshots can be found here: https://photos.app.goo.gl/uBd7k7VQbgSkVWfw7
    ❤️ If you enjoy our work you can support us by sending a coin or beer to: http://paypal.me/DanielMartinsson
    All time we invest in building sceneries and liveries is done in our free time outside regular daytime work and families. Any donation is welcome as it allows us to dedicate more time on X-plane, something that will be returned to the community as more airports and airplane liveries. ❤️
     
    INSTALLATION AND REQUIREMENTS
    This scenery is built to be combined with orthophotos to get the most out of the airport. We highly recommend that you don’t skip this step, the airport will however work with the default ground as well. The source used in the screenshots is from the Swedish provider Hitta.se.
    As always, paste the entire folder to: X-Plane 11\Custom Scenery
    The following libraries are required.
    MisterX6: https://forums.x-plane.org/index.php?/files/file/28167-misterx-library-and-static-aircraft-extension
    OpenSceneryX: https://forums.x-plane.org/index.php?/files/file/2226-opensceneryx/
    PuFlibrary: https://forums.x-plane.org/index.php?/files/file/51510-puf-libs/
    SE-LIB: http://rbdesign.se/download/scenery/XP11/SE_Lib.zip
    SE-LIB LAX: http://rbdesign.se/download/scenery/XP11/1-SE-LA-X-Library1_2.zip
    CONTACT
    If you have problem, ideas or suggestions, please contact us at: daniel@xdc.se
    You can also find us at our Discord server at: https://discord.gg/BHBCWbP
     
     
    COPYRIGHT AND CREDITS
    All of the brands, colors and names used in this package belong to the respective owner. Some of the assets used here are created by MisterX6 and then edited by us, a big thanks to him!
    This product is originally uploaded to the xplane.org community website. Uploading this package to any other site without the author's permission is prohibited.
    We’d like to thank the members of the Swedish flightsim community for the support we have gained over the years. A big thanks to all our beta testers for helping us with the final versions. A big thanks to Christopher at Bromma Airport for providing us with images from the airport. Lastly a big thank you is sent to Anton for helping us with images and a lot of input.

    433 downloads

       (2 reviews)

    1 comment

    Updated

  24. EGHQ Extreme

    I
    Using ALES freeware I've made this rendition of Newquay. If you own ALES payware please see my extreme scenery designed especially for use with this
     
    Newquay needed a facelift so as usual I took the terrrific work from the gateway and gave it an upgrade including:
    Realistic 4K ground textures with stunning PBR materials
    Wet Ground Textures
    3D grass
    Real ground damage, grunge and other cosmetics
    I havent added custom 3D building as I use AEP, see link below, this and ALES I believe are 2 must haves and you'll no longer need to spend money on 3rd party airports
     
    I have my own orthos that blend perfectly with Orbx to create the stunning coastlines, unfortunately Google doesnt allow me to share this but if you want to know how, feel free to message me
     
    Libraries needed:
    ALES DEV LIB (Make sure you have the latest version)
    RA Library
    MisterX Library
    OpensceneryX
    ADSparks Library
    You should always have all the libraries from the master list, just in case

    153 downloads

       (0 reviews)

    0 comments

    Submitted

  25. EGHQ Ultimate

    If you own the payware ALES - see link below (which you defintely should) then this scenery is for you.
    https://store.thresholdx.net/products/airport-layout-enhancement-solution-version-2
    Newquay needed a facelift so as usual I took the terrrific work from the gateway and gave it an upgrade including:
    Realistic 4K ground textures with stunning PBR materials
    Wet Ground Textures
    3D grass
    Real ground damage, grunge and other cosmetics
    I havent added custom 3D building as I use AEP, see link below, this and ALES I believe are 2 must haves and you'll no longer need to spend money on 3rd party airports
    I have my own orthos that blend perfectly with Orbx to create the stunning coastlines, unfortunately Google doesnt allow me to share this but if you want to know how, feel free to message me
     
    Libraries needed:
    ALES DEV LIB (Make sure you have the latest version)
    RA Library
    MisterX Library
    OpensceneryX
    ADSparks Library
    You should always have all the libraries from the master list, just in case

    187 downloads

       (0 reviews)

    0 comments

    Updated

Announcements




×
×
  • Create New...

Important Information

Please read the Terms of Use