Periwinkle Posted February 27, 2020 Share Posted February 27, 2020 Hello. Video link is included here. Im trying to create an airport and this is obv a show stopper!! Link to comment Share on other sites More sharing options...
Marten@Stairport Posted February 27, 2020 Share Posted February 27, 2020 So what's the problem in the video? I don't get it. Link to comment Share on other sites More sharing options...
Periwinkle Posted February 27, 2020 Author Share Posted February 27, 2020 Hello, Then you for your prompt response. After adding the scenery to SAM, then adding the jetway and setting its limits, force attaching the jetway to the LF1 door (to make sure no RED sliders on the arrangement positional settings), saving the jetway to the scenery; the airport animation operation tool/ Parking tab does not show the jetway listed for manual attachment but seen in the video attaches to the aircraft when in "auto" mode. Once the jetway is added with no RED sliders and saved to the scenery, should it not then be listed as available to connect to the aircraft in the airport operation window or am I confusing something? Thanks, Link to comment Share on other sites More sharing options...
Marten@Stairport Posted February 28, 2020 Share Posted February 28, 2020 Not as long as you have the authoring tool opened because in that case the "temporary disable Jetway movement" is activated. If you close the authoring tool it will be set to the configuration that your user will get. Link to comment Share on other sites More sharing options...
Periwinkle Posted February 28, 2020 Author Share Posted February 28, 2020 Cool. Ill try that. TY Link to comment Share on other sites More sharing options...
Recommended Posts