Joe_K Posted November 11, 2018 Share Posted November 11, 2018 (edited) Out of the VR Lab: IXEG 737-300 Nearly everything that is movable in this aircraft has been customized and tuned with VR controllers in mind. At last count, 189 manipulators have been VR upgraded or adjusted. Highlights of things tweaked to work in VR are: -VR Yoke in realistic mode -Throttle with detents you can feel at transition from flight idle -Flaps with every detent added to haptic vibrational feedback -Perfectly tuned IAS bugs around the airspeed indicator -All knobs tuned -All switches tuned with respect to functionality, i.e. holding the switch down and on release, it springs back to centre. -Speed Brake with haptic detents -Reverse throttle perfectly tuned -Center throttle manipulator added to control both throttles at once -Elevator trim tuned for accurate speed -HDG dial -CRS dial -Altimeter baro pressure knobs -Altitude Selector knob -IAS knob -VR Yoke added and tuned -Custom teleport hotspots, including one at the cabin door and in a wing window passenger seat. Things that still don't work correctly: *On the pilot side FMC, the top right line select button click-spot is a bit shifted to the right, but still functional. *When you grab the reverse throttle to actuate it, you have to "click" it once before you can move it. Not sure why. *The yoke has some hydraulic speed limits coded into it. It's not noticeable if you are flying her easy and correctly, but it can only be pitched and rolled so fast. I don't think this is a bug, but it's a noticeable thing and is a bit different than the other SimVRlabs aircraft. You definitely feel just a tad disconnected from fast and small corrections. Edited November 26, 2018 by Joe_K Link to comment Share on other sites More sharing options...
markdoyle Posted April 29, 2019 Share Posted April 29, 2019 Is this still working? the entire cockpit is mostly missing for me 1 Link to comment Share on other sites More sharing options...
NotRealPilot Posted May 24, 2020 Share Posted May 24, 2020 Hey guys, any plans to update it to the 1.3 version? Link to comment Share on other sites More sharing options...
3rdwatch Posted May 25, 2020 Share Posted May 25, 2020 Ditto The IXEG is almost unusable in 3d. How hard is it for designers to do a good VR Config file. The damn zibo is bullet proof Link to comment Share on other sites More sharing options...
carl Posted May 25, 2020 Share Posted May 25, 2020 18 hours ago, NotRealPilot said: Hey guys, any plans to update it to the 1.3 version? ditto Link to comment Share on other sites More sharing options...
emmetf Posted May 25, 2020 Share Posted May 25, 2020 Eagerly awaiting a 1.3 update as well! Yoke and throttles no longer work, and knobs are impossible to operate. Link to comment Share on other sites More sharing options...
3rdwatch Posted May 25, 2020 Share Posted May 25, 2020 I don't think there is much activity on here. Link to comment Share on other sites More sharing options...
emmetf Posted May 25, 2020 Share Posted May 25, 2020 1 hour ago, 3rdwatch said: I don't think there is much activity on here. Any idea where it might be better to post this? Link to comment Share on other sites More sharing options...
Recommended Posts