Argaeus Posted December 18, 2018 Share Posted December 18, 2018 (edited) With 1.0.1 update, the jetway penetration into the aircraft is way too much for both default Boeing aircraft (LF1 for B738 and LF1 and 2 for B744), can this be corrected? Is it not possible to have the final docking positions saved for each aircraft or is it asking for too much? Thanks again for this intelligent plugin. Edited December 18, 2018 by Argaeus added a second screen shot. Link to comment Share on other sites More sharing options...
Marten@Stairport Posted December 18, 2018 Share Posted December 18, 2018 It's probably because you played around with the door config in the previous version. Delete the entire plugin and the jetway configurations. Then install it and add the jetway configs again. All Aircrafts will be correctly configured by default. 1 Link to comment Share on other sites More sharing options...
Argaeus Posted December 18, 2018 Author Share Posted December 18, 2018 Thanks, will try that. Link to comment Share on other sites More sharing options...
Argaeus Posted December 18, 2018 Author Share Posted December 18, 2018 Well, I exactly followed your instructions and the end result is the same. Using default B737-800 from XP 11.30r1. 2 screenshots taken within a second before and after Force connect selected. Link to comment Share on other sites More sharing options...
Marten@Stairport Posted December 18, 2018 Share Posted December 18, 2018 (edited) Did you checked the loaded template? It has to have the same title like the jetway object. You can upload your scenery pack if you like and I will have a look. Works perfectly fine for me: Edited December 18, 2018 by Marten@Stairport Link to comment Share on other sites More sharing options...
Argaeus Posted December 18, 2018 Author Share Posted December 18, 2018 Interesting difference. I am using a 5.0 m Type 1 solid jetway and loaded the template for it before selecting Force connect but did not give it a name label and did not save it before doing so - if that matters at all. Will try to send the file or link via PM if I can right now. Link to comment Share on other sites More sharing options...
Marten@Stairport Posted December 19, 2018 Share Posted December 19, 2018 Problem solved, wrong jetway setup. Link to comment Share on other sites More sharing options...
Recommended Posts