cfm mod CFM56 5B/5A Engine Mod for FF320, Toliss A319/A321 1.0.0A

3 hours ago, ana348 said:

I have applied all the original files properly but no change

Sounds like an xplane issue, like I said try in cavok conditions, check your settings. If its doing it to different things including the fuselage not an issue with the mod.

Hello,

I decided to install this addon for toliss a319 the 5A option. Meanwhile I watched V1 simulations live and spotted that he have another sound for engines that I have, is it another sound addon or maybe I made something wrong

Fantastic addon! However, when the engines are installed, the wingflex on my FFA320 disappears. Is this normal or is there a fix to this?

how do you get the ridges at the end of the exhaust?

Should there be TWO particles files one in the object folder the was already there and the new one in the CFM folder?  It never asked me to overwrite particles files

Screen Shot 2022-02-18 at 11.36.21 AM.zip

On 2/18/2022 at 1:27 PM, 73samster said:

how do you get the ridges at the end of the exhaust?

?

On 2/18/2022 at 4:37 PM, 73samster said:

Should there be TWO particles files one in the object folder the was already there and the new one in the CFM folder?  It never asked me to overwrite particles files

Screen Shot 2022-02-18 at 11.36.21 AM.zip 200.88 kB · 0 downloads

There is an override for the toliss particles to lower some values for performance and there is 1 custom particle I included. In the pack the CFM one, that should only be used when using the engine stand alone and not with the IAE mod.

7 hours ago, cardajowol said:

?

There is an override for the toliss particles to lower some values for performance and there is 1 custom particle I included. In the pack the CFM one, that should only be used when using the engine stand alone and not with the IAE mod.

I am confused.  By the way the ridges I am referring to are the chevrons.  So if only installing the CFM mod, are you saying I only need one particles folder in the objects folder?

 

I have this problem I have the CFM's inside the LEAP and P and W's. Any fix?

27 minutes ago, captweanut said:

I have this problem I have the CFM's inside the LEAP and P and W's. Any fix?

Did you clear the engine.obj and Blade.obj in plane maker under misc objects?  I am not expert by issue was fixed by doing this but I am sure the developer will reply.

I think I learned something but anyone please clarify.  I understand that the ridges at the end of the engine are chevrons on the CFMs and they only appear based on the livery for the engine correct? Meaning, they only appear by default if the livery has it that is installed for the engine correct or am I missing something?

7 hours ago, 73samster said:

I think I learned something but anyone please clarify.  I understand that the ridges at the end of the engine are chevrons on the CFMs and they only appear based on the livery for the engine correct? Meaning, they only appear by default if the livery has it that is installed for the engine correct or am I missing something?

The chevrons are livery based, you'll need to make your own that remove them or use a livery that has done that for you.

8 hours ago, captweanut said:

I have this problem I have the CFM's inside the LEAP and P and W's. Any fix?

If this is the A321, you need to go back check plane maker and check you put the correct datarefs in the killdata ref entry as stated in the manual. You also want to make sure your using the engine objects from the 321 zip pack not copied from the 319.

Worked thanks.

 

May you do RR Trent XWB Next Please that Will be awesome thanks!

Pretty good engine BTW

In Plane Maker, the engines are displayed as from the addon, but when I start the game as defaults. What can this be related to? (Toliss A319)

Edited April 14, 2022 by Lordly

Paintkit for the 5B version still has no layers when opening up with GIMP. Does anyone have a fix for this?

A320 FF V1.3.0:

Have this optical issue with CFM56_5A. Using the Atarium liverys for CFM56_5A. Intallation was correct. Same with CFM56_5B

Edited May 22, 2022 by DaveWing

On 5/22/2022 at 11:47 AM, DaveWing said:

A320 FF V1.3.0:

Have this optical issue with CFM56_5A. Using the Atarium liverys for CFM56_5A. Intallation was correct. Same with CFM56_5B

No optical issue there, you just plainly have 2 engines over the top of each other. You might want to refer back to the manual check you've removed the default engines correctly.

On 5/23/2022 at 1:39 PM, cardajowol said:

No optical issue there, you just plainly have 2 engines over the top of each other. You might want to refer back to the manual check you've removed the default engines correctly.

The good thing is: you are always right. Thanks! 

The right engine writing look transparent and the left one is ok how can i fix it ?

Can any of these engines be used on Toliss A320?

Edited May 26, 2022 by slicker55

3 hours ago, slicker55 said:

Can any of these engines be used on Toliss A320?

Toliss don't have an A320, its an A321 or A319.

And yes, the engines fits to the toills fleet. Just download the right package and follow the instructions..

Hi DaveWing ,

Thanks, my mistake, I should have known as I already have the Toliss A319 and A340. I don't know why I thought they did the A320 as well... old age LOL

On 5/25/2022 at 1:40 AM, AhhmedLndy said:

The right engine writing look transparent and the left one is ok how can i fix it ?

You probably don't have the N1 object added last in the order in plane maker.

7 hours ago, cardajowol said:

You probably don't have the N1 object added last in the order in plane maker.

Thanks Fixed